343
U
f8: Release Button to Use Dial
This option allows adjustments that are normally made by holding
a button and rotating a command dial to be made by rotating the
command dial after the button is released.
At the default setting
of [No], the button must be pressed while the command dial is
rotated.
If [Yes] is selected, the setting can be changed by rotating
the command dial after the button is released.
Setting ends when
the button is pressed again, the shutter-release button is pressed
halfway, or any of the I, E, t, M, ISO, QUAL, or WB button is
pressed.
Except when [No limit] is selected for Custom Setting c2
[Auto meter-off delay], setting will also end when the exposure
meters turn off.
