144
Copyright
© 2004 Nokia. All rights reserved.
If you already have access points, to create a new one, select Options > New
access point > Use default settings or Use existing settings, make the
needed changes, and press Back to save the settings.
Options in Access points list are: Edit, New access point, Delete, Help, and
Exit.
Access points
Start to fill in the settings from the top because depending on what data
connection you select (Data bearer) or whether you need to insert a Gateway
IP address, only certain setting fields are available.
Options when editing access point settings are: Change, Advanced settings,
Help, and Exit.
Follow the instructions given to you by your service provider.
Connection name — Give a descriptive name for the connection.
Data bearer — Depending on what data connection you select, only certain
setting fields are available. Fill in all fields marked with Must be defined or
with a red asterisk. Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network service provider must
support this feature, and if necessary, activate it for your SIM card.
Access point name (for GPRS only) — The access point name is needed to
establish a connection to the GPRS network. You obtain the access point
name from your network operator or service provider.
