A SERVICE OF

logo

CABINET
BOTTOM
FRONT BASE
1
2
BACK BASE
3
STEP 3 : HINGE,BASE AND LEGS INSTALLATION
Raise cabinet and adjust the level by turning (clockwise) the LEGS
(D) as needed. Use a carpenter’s level
Fasten BACK BASE (C) with two
HEX BOLTS (G) at each side
3
Install four LEGS (D) into BASES (C)
1
2
Fasten FRONT BASE (C) (Three holes at each side) and one
HINGE (F) to the BOTTOM of the cabinet, with HEX BOLTS (G).
HEX WRENCH (H) included
NOTE :
Hinge can be on either side of the cabinet (FRONT BASE
has to be ipped)