EN-3
CD-11 Indicator
*
OVERVIEW OF CONTROLS AND INDICATOR FUNCTIONS
No. Designation No. Designation
No. Designation No. Designation
No. Designation
FunctionFunction
FunctionFunction
Function
1 Display LCD display, indicates weight, modes and setup information.
2 Center of Zero LCD indicator prompt, indicates center of zero when within +/- 0.25d.
3 Stable LCD indicator prompt, indicates that the measured value has become stable.
4 Display Hold LCD indicator prompt, indicates display hold is active.
5 ON/ZERO/
Off
button Turns Indicator on or off. Secondary use, provides zero function.
6 Pcs LCD indicator prompt, indicates parts counting function is active.
7 PRINT/
Units
button Short press, prints data which is displayed on the Indicator.
Long press, changes unit of measure or mode.
When in menus, each press advances through the menus.
When in submenus or establishing Average Piece Weights, each press
toggles through settings.
8 Gross Brutto LCD indicator prompt, indicates gross weight.
9 G/N/T/
Menu
button Recalls Gross/Net/Tare. Long press allows entry into menus.
When in menus, accepts the settings.
when in parts counting mode, long press sets up Average Piece Weight.
10 Net LCD indicator prompt indicates net weight.
11 TARE button When pressed, enters tare value into memory.
12 Tare LCD indicator prompt indicates tare weight.
When establishing print interval, increments through the settings.
13 BAT LCD indicator prompt, indicates low battery.
14 kg LCD indicator, when lit, indicates weight in kilograms.
g LCD indicator, when lit, indicates weight in grams.
15 oz LCD indicator, when lit, indicates weight in ounces.
16 lb LCD indicator, when lit, indicates weight in pounds.
5
7
8
10
11
9
2 13
1
4
16
15
14
12
6
3
