32
Misfeed Removal
General Information
All messages appear on the display panel
of the main unit. When a misfeed has
occurred, printing will stop and the
message shown below will appear.
Follow the procedure below to remove
misfed paper.
CAUTION
• Do not damage or touch the
photoconductive drum.
• Be careful not to tear the misfed paper
during removal.
• If paper is accidentally torn during
removal, be sure to remove all pieces.
General misfeed removal procedure
If the INFORMATION key is pressed
when a misfeed has occurred, messages
appear giving guidance for misfeed
removal. The messages appear in
sequence and can be viewed by using the
▼ or ▲ keys.
1. Press
INFORMATION.
2.
Press ▼.
3. Use ▼ or ▲ on the operation panel to
scroll through the guidance messages.
4. Press INFORMATION to close the
misfeed removal guidance.
The fusing unit is hot. Take
care in removing paper.
ERROR
INFORMATION
