A SERVICE OF

logo

2. Preparation
5
EN
2.2
Setting the Date and Time
1. Set the monitor to the correct date and time before taking
a measurement for the first time.
Press the button.
2. Press the O/I START button to store the setting.
Notes:
To reset the date and time, hold down the button while the power is off.
If the batteries have been removed for 30 seconds or more, the date and time setting will
need to be reset.
If the date and time are not set, “-:--” appears during or after measurement.
1)
2)
Push the button to
change.
Hold down to advance
the digit rapidly.
Push the button to
confirm.
Next setting appears.
Year
Month
Day
Hour
Minute
HEM-6200-E_D_M_main.book 5 ページ 2011年10月3日 月曜日 午後6時25分