Advanced Settings (Setup Menu)
En-19
Setting Item Default Value Setting Details
Double Bass On This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off": Bass output will not be boosted.
● The setting will not automatically be configured
even if you performed the automatic speaker
setup.
Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring
settings.
"feet": When setting in feet (0.1ft to 30.0ft, in
increments of 0.1ft)
"meters": When setting in meters (0.03m to
9.00m, in increments of 0.03m)
Front Left 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Center 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Front Right 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Height Left 9.0ft/2.70m Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Height Right 9.0ft/2.70m Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Surround Right 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
Setting Item Default Value Setting Details
Back Right 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Back Left 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
● The setting cannot be changed during ZONE
B playback.
Surround Left 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
Subwoofer 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
● Default values vary depending on the regions.
● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" -
"Speaker Channels" / "Subwoofer".
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item Default Value Setting Details
Front Left 0dB Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Center 0dB Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Front Right 0dB Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Height Left 0dB Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The setting cannot be changed during ZONE
B playback.
Height Right 0dB Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The setting cannot be changed during ZONE
B playback.
