Function 1
Choose your desired function from “Brightness” , “PIP”, “Test Pat-
tern”, “Zoom”, “Projection”, “V ARC+” or “H ARC+”.
Function 2
Choose your desired function from “Contrast” , “PIP Source”, “PIP
Swap”, “Color”, “V ARC-”, “H ARC-” or “Lamp Settings”.
IR Function
When this function is “On”, the projector can be operated by the
remote control. By selecting “Off”, you will only be able to use the
control panel keys.
Remote Code
Set IR address of the remote. The address of the remote control
is changed by pressing the Video and arrow buttons together to
select IR address 1/2/3/4. The remote control LED indicator will
blink twice to conrm the new remote control address.
IR 1: Press Video and RIGHT buttons together for IR 1. After
nish the remote code, the remote control LED indicator
will ash Green 1 time to conrm.
IR 2: Press Video and DOWN buttons together for IR 2. After
nish the remote code, the remote control LED indicator
will ash Green 2 times to conrm.
IR 3: Press Video and LEFT buttons together for IR 3. After n-
ish the remote code, the remote control LED indicator will
ash Green 3 times to conrm.
IR 4: Press Video and UP buttons together for IR 4. After nish
OPTION | Remote
Settings
IR 1
IR 2
IR 3
IR 4
LED indicator
