A SERVICE OF

logo

English
16
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
Elevator Feet
Elevator Buttons
The projector is equipped with elevator feet for adjusting the
image height.
To raise the image:
1. Press the elevator buttons
.
2. Raise the image to the desired height angle , then release
the button to lock the elevator feet into position.
3. Use screw in feet to ne-tune the display angle.
To lower the image:
1. Press the elevator buttons.
2. Lower the image, then release the button to lock the eleva-
tor feet into position.
3. Use screw in foot to ne-tune the display angle.
Tilt Adjusting Foot
3 3
2
11