English
44
Appendices
Image has slanted sides:
If possible, reposition the projector so that it is centered on the
screen and below the bottom of the screen.
Use “Display-->V Keystone” from the OSD to make an adjust-
ment.
Image is reversed
Select “System-->Projection” from the OSD and adjust the
projection direction.
Blurry double image
Press “SBS Mode” button and switch to “Off” to avoid normal
2D image is blurry double image.
Two images, side-by-side format
Press “SBS Mode” button and switch to “SBS” for input signal
is HDMI 1.3 2D 1080i side-by-side.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
Check if the 3D glasses is turned on.
When the input signal is HDMI 1.3 2D (1080i side-by-side
half), press “SBS Mode” button and switch to “SBS”.
