Chapter 4. Key Telephone Features Section 700 - Operation
4-50 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
“ENTER FWD EXT#” appears on the display.
6. Press the
AUTO
key.
7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed
dial 90-99 or 900-909).
Note:
The speed dial code must include the
CONF
key (to indicate a
trunk call), the appropriate trunk access code, and the outside number.
8. Press the
HOLD
key.
Calls will now be forwarded according to the forwarding type selected.
To assign Call Forwarding to a Hunt Group pilot number or an
extension number to an FF key:
1. Press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the FF key to be programmed.
“Enter Code” appears on the display.
4. Enter “72.”
5. Enter the Call Forwarding code (0, 1, 2, or 4).
6. Enter the Hunt Group pilot number or an extension number.
7. Press the
HOLD
key.
To erase a code stored in an FF key:
Note:
FF keys assigned as CO lines cannot be cleared using the following
procedure. CO line keys can only be cleared through system programming.
1. Press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the FF key to be programmed.
“Enter Code” appears on the display.
4. Press the
HOLD
key.
“Code Cleared” appears.
