19
1. Parts and their functions
7
AUX bus crosspoint buttons
These buttons are used to select the source of the bus
which was selected by the AUX bus selector button (6).
Buttons 1 to 24 can be selected using the [SHIFT] button.
Refer to “1‑1‑2. Selecting the bus using the SHIFT
function” (<Operations and Settings> Operating
Instructions).
8
Crosspoint buttons exclusively for AUX/DISP
buses (AUX/DISP SOURCE)
These buttons are used to select the AUX bus sources
while the [AUX1 to AUX4] buttons among the AUX bus
selector buttons (6) are lit.
These buttons are used to select the DISP bus sources
while the [DISP] button among the AUX bus selector
buttons (6) is lit.
The buttons light up in amber when they are pressed.
[MV]:
This is used to select the multi view display signals for
the AUX buses or DISP buses.
[PVW]:
This is used to select the PVW signals for the AUX
buses or DISP buses.
[PGM]:
This is used to select the PGM signals for the AUX
buses or DISP buses.
