E
N
G
L
I
S
H
8
CQ-DF701W
17
E
N
G
L
I
S
H
7
CQ-DF701W
16
Radio
Band
Press [BAND] to change the band.
2
Radio Mode
Press [SOURCE] to change to the radio mode.
1
Tuning
[TUNE $]/[$]: Up
[TUNE %]/[%]: Down
Press and hold [TUNE $] or [TUNE %]/[$] or
[%] for more than 0.5 seconds, then release.
Seeking will start.
One-Touch Selection of a Preset Station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manually save a sta-
tion in the preset
memory
Entering Numbers Directly from the Remote Control
Select a band and frequency (step 1, 2 and 3 on the previous page).
Press and hold [1] to [6] on the remote control for more than 2 sec-
onds to memorize.
1
2
3
Auto Preset
Memory
(AUTO
•
P)
Automatically save
strong stations in the
preset memory
Select a band (steps 1 and 2 on the
previous page).
Press and hold [BAND] (AUTO
•
P) for
more than 2 seconds.
Note:
≥New stations are overwritten on existing saved stations after following this procedure.
Preset Station
Calling
Select a band (steps 1 and 2 on the previous page).
Press [P. SET "] or [P. SET #]/["] or [#] to select the preset
number for tuning in the preset station.
Entering Numbers Directly from the Remote Control
Press [1] to [6] on the remote control.
Note:
≥Frequency setting can be performed even after selecting a preset num-
ber.
Select a band and frequency (steps 1, 2 and 3 on the previous
page).
Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than
2 seconds until the preset number blinks.
Press [P. SET "] or [P. SET #]/["] or [#] to select a preset num-
ber.
Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than
2 seconds to memorize.
Direct Memory
Your favorite radio station can be memorized in
[D
•
M] on the main unit.
Default: FM 87.50 MHz
Memorize
Recalling the Direct Memory
Select a band and frequency (steps 1, 2 and
3).
Press and hold [D
•
M] for more than 2 seconds.
Frequency blinks once and is saved in the mem-
ory.
Press [D
•
M].
1
2
Scanning:
Radio mode display
Press [D
•
M] again to cancel and return to the previ-
ous source.
Note:
≥You can recall the direct memory when the power
is off.
FM stereo indicator
1
2
≥The display blinks once, and a re-
ceiving station is saved in the
memory.
Preset number
≥The 6 strongest available stations will be automatically saved in the
memory under preset number 1 to 6.
≥Once set, the preset stations are sequentially scanned for 5 seconds
each.
≥Press [P. SET "] or [P. SET #]/["] or [#] for the broadcast you
want to listen to.
(Press [1] to [6] on the remote control.)
1
2
1
2
4
Note:
≥The new station is overwritten on existing saved
stations after following this procedure.
3
