On-screen menu navigation
28 - ENGLISH
Note
z
The remote control may not have the default
button, depending on the DIGITAL LINK compatible
projector model connected to the interface box.
z
To restore all settings to the factory default settings
simultaneously, refer to [OPTION] on the menu →
[INITIALIZE ALL] (
page 40).
z
The mark above the bar scale in the individual
adjustment screen indicates the factory default
setting. The position of this mark varies depending
on the selected input signals.
&XUUHQWDGMXVWPHQWYDOXH
Main menu
The following items are included in the main menu.
When a main menu item is selected, the screen
changes to the sub-menu selection screen.
Main menu item
[INPUT SELECT]
[PICTURE]
[POSITION]
[LANGUAGE]
[OPTION]
Sub-menu
The sub-menu of the selected main menu item is
displayed, and you can set and adjust items in the
sub-menu.
■
[INPUT SELECT]
Details (
page 29)
■
[PICTURE]
Sub-menu item
Factory
default
Page
[SYSTEM SELECTOR] [AUTO] 30
[CLAMP POSITION] [24]
*1
30
[DIGITAL CINEMA
REALITY]
[ON] 31
*1: Depends on the input signal.
Note
z
The factory default settings may vary depending on
the picture mode.
z
Sub-menu items and factory default settings are
displayed differently depending on the selected
input terminal.
■
[POSITION]
Sub-menu item
Factory
default
Page
[SHIFT] [0] 32
[CLOCK PHASE] [0] 32
[OVER SCAN] [0]
*1
32
[ASPECT] [AUTO]
*1
33
[INPUT RESOLUTION] — 34
*1: Depends on the input signal.
Note
z
Sub-menu items and factory default settings differ
depending on the selected input terminal.
■
[LANGUAGE]
Details (
page 35)
■
[OPTION]
Sub-menu item
Factory
default
Page
[OSD DESIGN] [TYPE1] 36
[RGB SYNC TERMINAL] [LOW] 36
[CLOSED CAPTION
SETTING]
[OFF] 36
[BACK COLOR] [BLUE] 36
[SXGA MODE] [SXGA] 37
[WIDE MODE] [AUTO] 37
[NO SIGNAL SLEEP] [10MIN.] 37
[AUDIO SETTING] — 38
[AUTO SETUP] — 39
[OUTPUT RESOLUTION] — 39
[STATUS] — 40
[INITIALIZE ALL] — 40
