Features Summary
62
The unit provides various programming features. Program the desired setting by referring to the
programming tables (p. 63–68).
1
Press .
Display:
2
Select the feature you wish to program.
■
For basic features (p. 63)
Rotate until the desired
feature is displayed.
■
For advanced features (p. 64–68)
Rotate until the following is
displayed.
Press and rotate
until the desired feature is displayed.
3
Press .
●
The current setting of the feature will be
displayed.
4
Rotate until the desired setting
is displayed.
●
This step may be slightly different
depending on the feature.
5
Press .
●
The setting you selected is set, and the
next feature will be displayed.
6
To exit programming, press .
ADVANCED MODE
1.SYSTEM SET UP
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using .
1. Press
.
2. Press and the 2-digit code number.
3. Follow steps 3 to 6 above.
●
See programming tables (p. 63–68) for codes.
Programming!
General programming method
To cancel programming
Press to exit the program.
