4. Telephone
39
4.7 Viewing and calling
back using caller
information
You can easily view caller information and call
back.
Important:
L Calling back will not be possible if the
caller information does not include a
telephone number.
Note:
L Telstra, Optus, Telecom New Zealand and
TelstraClear do not currently send caller
name information.
4.7.1 With the cordless handset
The display will show q and the number of new
calls in standby mode.
Example:
1 Press $ (centre of joystick).
2 Select £, then press ,.
L The most recent call is displayed.
3 Push the joystick down repeatedly to search
from the most recently received caller
information.
L If you push the joystick up repeatedly, the
display order will be reversed.
L A Q is displayed next to items which have
already been viewed or answered, even if
they were viewed or answered using the
base unit or another cordless handset.
4 Press {C} or {s} to return the call.
L The cordless handset will start dialling
automatically.
Display while viewing
L When no calls have been received, the
display will show “Memory Empty”.
To stop viewing
Press {ih} after step 3.
4.7.2 With the base unit
The display will show the number of new calls in
standby mode.
Example: 10 NEW CALLS
10:59
1 Press {CALLER ID}.
L The most recent call is displayed.
2 Press {B} to search from the most recently
received caller information.
L If you press {A}, the display order will be
reversed.
3 Lift the handset or press {DIGITAL SP-
PHONE} to return the call.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
To change the way caller information is
displayed
Press {CALLER ID} repeatedly after step 2.
Example: 3456789012
20 Jul.11:20 ,
b
SAM LEE
20 Jul.11:20 ,
L A Q on the display means the item has
already been viewed or answered, even if it
was viewed or answered using a cordless
handset.
$/,
{ih}
{C}
{s}
{
FAX/START}
{CALLER ID}
{DIGITAL SP-PHONE}
{STOP}
{A}{B}
FC243AL-PFQX2096ZA-en.book Page 39 Thursday, September 30, 2004 3:37 PM
