Receiving a fax manually
(AUTO ANSWER off)
2When: –document reception is required,
–a fax calling tone (slow beep) is heard, or
–no sound is heard,
press (Fax).
Using the main unit:
1When you hear a ring, lift the handset
to answer the
call.
3Replace the handset.
●
The unit will start fax reception.
Using the portable handset:
1When you hear a ring, lift the portable handset from
the charger to answer the call.
●
If the portable handset is not set on the charger,
press (Talk).
2When: –document reception is required,
–a fax calling tone (slow beep) is heard, or
–no sound is heard,
press
(Fax reception) until a single beep is heard.
●
The main unit will start fax reception.
You can select beforehand whether to receive faxes by
“Receive in memory” or “Receive on recording
paper”.
Receive in memory: (Default setting)
The received fax will be stored in memory. You can
check the contents on the display, then print them if
necessary.
Receive on recording paper:
The received fax will be printed on recording paper.
Setting/canceling “Receive in
memory”
