Answering system
T
he answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 42).
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
Memory capacity (including your
g
reeting message)
The total recording capacity is about 38
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The message counter on the base unit
flashes if the answering system is turned
on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
s
ystem on/off
The answering system is preset to on.
Base unit
P
ress MANSWER ON/OFFN to turn on/off the
answering system.
Handset
1 T
o turn on:
MMenuN (right soft key) #327
To turn off:
MMenuN (right soft key) #328
2 MOFFN
Note for base unit and handset:
R When the answering system is turned on:
–
is displayed on the handset.
–
The message counter on the base unit
displays the total number of messages
(old and new).
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording y
our greeting message
1 MMenuN (right soft key) #302
2 MbN: “Yes” a MSelectN
3 After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4 Press MStopN to stop recording. a MOFFN
Using a pre-recorded greeting
m
essage
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 42)
is set to “Greeting only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
36
For assistance, please visit http://www.panasonic.com/help
Answering System
PRW130USA(en)_0311_ver110.pdf 36 2014/03/11 12:58:58
