Station Features and Operation (PT/SLT)
158 User Manual
4.3.50 Hands-free Operation [PT only]
You can answer an intercom call without lifting the handset.
Setting
Switching from the handset to hands-free mode
Switching from hands-free to the handset mode
Conditions
• The hands-free mode is canceled if you do not start dialing within 10 seconds.
• The KX-T7050 and KX-T7055 have a MONITOR button instead of a SP-PHONE button.
It can be used for hands-free dialing, etc., but not for a hands-free conversation.
• You can enable hands-free mode by pressing a CO or INTERCOM button without going
off-hook.
• When "Full One-Touch Dialing" is enabled, pressing a One-Touch Dialing, DSS, Phantom,
REDIAL or SAVE button provides the hands-free mode.
PT
Press SP-PHONE.
The microphone and speaker are now activated and the
hands-free operation is available.
SP-PHONE
PT
Press SP-PHONE.
Hang up.
• Do not replace the handset without pressing the SP-PHONE button
first, or the line will be disconnected.
SP-PHONE
PT
Lift the handset.
