Operations 1-27
1.3 Making Calls
Basic Operations
Redialing Automatically (Automatic Redial)
• If another operation is performed during automatic redial, this function will be canceled.
• To cancel automatic redial, press the FLASH/RECALL button.
• A flexible button can be assigned as the SAVE button.
• 1.3 Making Calls, “Redialing the Last Number Dialed (Last Number Redial)”
• 1.3 Making Calls, “Redialing the Saved Number (Saved Number Redial)”
• See the Installation Manual, Section 3, “Redial”.
PT
PT
PT
PT users can redial the last number dialed and saved number automatically by going off-hook
with the SP-PHONE/MONITOR button and pressing the corresponding button directly. Redial
will be automatically repeated 3 times until the called party answers.
PT
Press REDIAL or the CO assigned as the SAVE button.
Press SP-PHONE or MONITOR.
SP-PHONE
or
MONITOR
or
REDIAL
CO
!
!
☞
Automatically saves the last outside phone number dialed so that you can make a call to the
same party later using a simple operation.
PT SLT
Lift the handset. Dial ## or 80.
or
Press REDIAL.
Lift the handset or press
SP-PHONE/MONITOR.
REDIAL
## 08
Redialing the Last Number Dialed (Last Number Redial)
• Up to 64 digits can be stored and redialed. This does not include an outside (CO) line access
code.
• If you hear a busy tone when attempting to redial, select another line and press the REDIAL
button or feature number.
• “ ”, “#”, “PAUSE”, and “INTERCOM” (for secret dialing) are counted as 1 digit.
• While calling or during a conversation, pressing the REDIAL button will disconnect the
current call and redial the stored number.
• You can check the stored number. Press the REDIAL button while on-hook, and the stored
number will be displayed.
• 1.3 Making Calls, “Redialing Automatically (Automatic Redial)”
• See the Installation Manual, Section 3, “Redial”.
PT
PT
PT
!
!
☞
