AC Adaptor ..................................one
Order No.
PQLV1Z
(PQLV1)
Telephone Line Cord ...................one
Order No.
PQJA10075Z
Battery..........................................one
Order No.
HHR-P104
Handset Cover.............................one
Order No.
PQKK10140Z2
Belt Clip........................................one
Order No.
PQKE10375Z2
Shoulder Rest Attachment...........one
Order No.
PQKE10364Z1
For extra orders, call 1-800-332-5368.
For hearing or speech impaired TTY
users, call 1-866-605-1277.
1
Getting Started Section 1
1-A Accessories 1-B Location of Controls
1-C Settings
3
Charge the battery for 6 hours.
•See section 4-A for more
details.
•The unit beeps once and
the CHARGE indicator
lights.
Handset Base unit
•
USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
•The AC adaptor must remain connected at all times. (It is normal
for the adaptor to feel warm during use.)
•The unit will not work during a power failure. We recommend
connecting a standard telephone to the same telephone line or to
the same telephone jack using the Panasonic KX-J66 T-adaptor.
To select the dialing mode TONE (preset) or PULSE
Make sure the handset and base unit are not being used. The handset
must be operated near the base unit and while off the base unit.
1. Press [VOICE ENHANCER], then press [8].
•The VOICE ENHANCER indicator flashes.
2. To select PULSE, press [1].
OR
To select TONE, press [2].
3. Press [VOICE ENHANCER].
•The handset beeps and the indicator light goes out.
For assistance, please call: 1-800-211-PANA(7262)
CHARGE Indicator
OR
To replace the battery:
Press the notch on the cover firmly and
slide it as indicated by the arrow.
Replace the old battery with a new one
(4-A). Close the cover and charge the
battery for 6 hours.
