Before Requesting Help
84
Problem
The answering system is on,
but incoming messages are
not recorded.
You cannot listen to the
recorded messages.
“Message full” is
displayed and the ANSWER
ON indicator flashes rapidly,
and no new messages are
recorded.
You cannot operate the
answering system at the
base unit.
Remedy
•The recording time is set to “Greeting
only”. Select “1 minute” or “3 minutes”
(p. 21).
•Memory is full. Erase some, or all, of the
messages (p. 57).
•Make sure that the unit is in the standby
mode.
•Memory is full. Erase some, or all, of the
messages (p. 57).
•The handset user is operating the
answering system, or is engaged in an
outside call. Wait until the “Handset in
use” disappears.
Answering System
Problem
You cannot have a
conversation using the
handset.
You cannot have a
conversation using the
headset.
Remedy
•When the headset is connected (p. 74),
you must use the headset to talk with
the caller. To have a normal cordless
phone conversation, disconnect the
headset.
•Make sure that the headset is connected
properly (p. 74).
• may have been pressed. If the
button lights, press to continue the
conversation with the headset.
•If “EXIT=Headset” is displayed on the
base unit, press (EXIT) to switch from
the speakerphone to the headset.
