Fax auto redial
If the line is busy or there is no answer, the unit will
automatically redial the number up to 2 times.
≥This feature is also available for;
—sending faxes using the JOG DIAL directory
(p. 45), and
—delayed transmission (p. 52).
≥During redial, the following will be displayed.
Display:
≥To cancel redialing, press (STOP).
If your unit cannot send a fax
Verify that the number dialed is answered by the
other party’s machine.
1. Press (MONITOR).
2. For stations 1–11
Press the desired One-Touch Dial key.
For stations 12–22
Press (LOWER) then press the desired
One-Touch Dial key.
WAITING REDIAL
44
Sending Faxes
1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
4
If necessary, press (RESOLUTION) repeatedly to
select the desired setting (p. 43).
5
For stations 1–11
Press the desired One-Touch Dial key.
For stations 12–22
Press (LOWER), then press the desired
One-Touch Dial key.
Example:
≥The unit will start transmission.
Helpful hints:
≥You can confirm the stored items on the display (p. 41),
or on the telephone number list (p. 123).
≥You can use the JOG DIAL directory to select the
station name instead of using the One-Touch Dial
keys. Rotate (JOG\DIAL) until the desired name is
displayed, then press (START/SET/COPY).
≥The connecting tone will be heard during dialing to tell
you the status of the other party’s machine (p. 59).
CONNECTING.....
FAX=<John>
STANDARD
Sending a fax using the One-Touch Dial!
Before using this feature, program the desired names and telephone numbers into the One-Touch Dial (p. 37).