Select “ON” or “OFF” with the buttons.
The submenu can be displayed with the “ENTER”
button only when “ON” is selected.
• Main window:
The terminal selected for input is displayed.
Size: The user can specify the display size of the
main window between 10% and 100%.
Position: The user can specify the display position
of the main window on the screen.
•Subwindow:
The input terminal for the subwindow is displayed.
If more than one input terminal is available for P IN
P, one of them can be selected with the buttons.
Size: The user can specify the display size of the
subwindow between 10% and 100%.
Position: The user can specify the display position
of the subwindow on the screen.
• Frame lock:
The user can select the window to apply frame
lock.
“MAIN WINDOW”:
Frame lock is set for the input signals
specified for the main window.
“SUBWINDOW”: Frame lock is set for the input
signals specified for the
subwindow.
• Type:
The user can select the window that is displayed by
priority when two windows overlap.
“
MAIN WINDOW”: The main window is displayed by
priority.
“
SUBWINDOW”: The subwindow is displayed by priority.
• Linearity:
The user can select the window to apply the linearity
correction when the P IN P function and the keystone
distortion correction function are both used
simultaneously.
“
MAIN WINDOW”
: The linearity correction is applied
to the main window.
“
SUBWINDOW”:
The linearity correction is applied to
the subwindow.
Note
• The P IN P function is not available
depending on the input signals and the
selected input terminals.
• The main window’s picture adjustment
values such as the picture mode, gamma
selection and color temperature setting
for the main window will be applied.
