10
RQT9883
[SC-HC49DB]
Listening to DAB+
Preparation
≥ Make sure that the DAB antenna is connected. (l 5)
≥ Turn the unit on.
To listen to DAB+ broadcasts, the available stations
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO
SCAN” and memorise the stations that are available
in your region if the memory is empty.
Press [CD/RADIO] repeatedly to select “DAB+”.
≥ “SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception
(l 11, “To verify or improve the signal reception quality”) and
then re-scan DAB+ stations.
∫ To re-scan DAB+ stations
When new stations are added or when the antenna
has been moved, reperform the auto scan.
1 Press [PLAY MENU] to select “AUTOSCAN” and
then press [OK].
2 While “START ?” is flashing,
Press [OK].
Preparation*
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
3 Press [3, 4] to select “STATION” and then press
[OK].
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [:/6] or [5/9] to select the
station.
You can preset up to 20 DAB+ stations.
Preparation
Press [CD/RADIO] repeatedly to select “DAB+”.
1 While listening to a DAB+ broadcast
Press [OK].
2 Press [3, 4] to select the desired preset channel
number and then press [OK].
≥ You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
≥ The station occupying a channel is erased if another station
is preset in that channel.
∫ Listening to preset DAB+ stations
Preparation*
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
3 Press [3, 4] to select “PRESET” and then press
[OK].
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [:/6] or [5/9] to select the
station.
≥ To select by preset, make sure that stations have already
been preset manually.
Some DAB+ stations provide a secondary service as
well as the primary service. If the station you are
listening to is providing secondary service, “ ” will be
displayed.
1 While “ ” is displayed.
Press [PLAY MENU] repeatedly to select “DAB
SECONDARY”.
2 Press [3, 4] to select the secondary service and
press [OK].
≥ The setting will go back to primary service when changes are
made (e.g. the station is changed).
* The “TUNEMODE” setting is memorised until it is changed.
Memorising stations
≥ When updating the memory with the auto scan, preset
stations will be erased. Preset them again (l right).
Listening to the memorised stations
Presetting DAB+ stations
≥ To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(l left).
Listening to the secondary service
SC-HC49DBGN&GN&GS~RQT9883-B.book 10 ページ ２０１４年２月２１日 金曜日 午前９時２６分
