18
Hotel Mode Setup
Display “Hotel Mode”
Press MENU, G, Y and 0 remote button.
Hotel Mode
Mode
Initial volume
TA Ctrl
Initial input
Initial channel
Max. volume
OSD Ctrl
Save
1/2
HDMI 1
101-1
On
Internal
10
25
Off
Hotel Mode
Button lock
Power ctrl
Remote
CC reset
Lock reset
2/2
Pattern 1
On
Panasonic
Off
Off
select
Adjust
Select “Save” then press OK
Complete Hotel Mode setup
Hotel Mode
Mode
TA Ctrl
Initial input
Save
1/2
HDMI 1
On
Internal
select
ok
Operating restrictions can be set by setting the operating mode or initial settings in the “Hotel Mode”.
Hotel Mode menu
Item Adjustments/Configurations (alternatives)
Mode
Sets operation mode Hotel mode(Guest mode) or Setup mode. (On/Off)
These settings are enabled even after the AC is switched off and on again.
On: These menu restrictions are enabled. Communication can be performed with TA (Online), and the
“Guest menu” is displayed. (Guest mode)
Off: These menu restrictions are disabled. Communication with TA cannot be performed, and the “Setup
menu” is displayed. (Setup mode)
TA Ctrl
Sets TA (Terminal Adaptor) status. (Internal/External/Off)
Internal: Use Internal TA External: Use External TA
Initial input
Selects Input when the TV is turned on.
Does not operate when input from TA* to the TV is prohibited.
(-/RF/HDMI 1-3/Component/Video1-2/PC)
Initial channel
Sets the channel at power-on.
Initial volume
Sets the volume level at power-on. (0-100)
Does not operate when control from TA to the TV is prohibited.
Max. volume
Sets the maximum volume level. (0-100)
OSD Ctrl
Limits the OSD display. (Off/Pattern1)
Pattern 1: “Recall” and “Shut-off notification” messages are not displayed at power-on.
Also displayed when “Pattern 1” is specified as the display command from TA.
Button lock
Limits the TV panel button operation. (Off/All/Pattern1)
Pattern 1: Only INPUT and POWER buttons are available.
All: All buttons are not available.
Power ctrl
Sets the screen condition when the AC power is switched on. (Off/On)
Off: Starts up in last screen.
ON: Starts up in screen On.
Remote
Switches Operation guide according to remote control. (Panasonic/Others)
CC reset
Sets CC setting status. (Off/On)
Off: Saves the last settings. On: Resets all CC settings to defaults.
Lock reset
Sets Lock setting status. (Off/On)
Off: Saves the last settings. On: Resets all Lock settings to defaults.
* TA: Terminal Adapter
