Prog. RF Ch
Service Name Net ID. TS ID. Quality
This will take about 3 mins.
•
Auto Tuning
•
Connection
Connection
External equipments and cables shown in this manual are not supplied with this TV.
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Need help
with operations?
(example: Sound menu)
On-screen operation
guide will help you.
select
Turn the TV On with the On / Off switch
Usable characters and numbers
Auto Tuning
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
•
For detailed procedures
"Owner ID" (p. 26)
•
Make a note of the PIN number
in case you forget it.
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Input owner ID
DVB Auto Tuning is now complete and your TV is ready for viewing.
■
When inputting owner ID later
•
From now on you can use the
remote control to turn On the TV
or turn the TV to standby mode.
4
•
If you input the ID later
"Owner ID" (p. 26)
•
Auto Tuning will start to search for
digital TV services and store them.
•
To check service list at-a-glance
TV Guide (DVB) (p. 12)
•
To edit analogue channels
"Programme edit" (p. 24)
•
The sorted service order depends
upon the TV signal, the broadcasting
system and reception conditions.
Note
•
If tuning have failed, perform
"Auto Tuning" (p. 22).
•
If it is not the fi rst time to
perform Auto Tuning, all
previous tuning data will be
erased.
Select your state
2
Start Auto Tuning
3
This TV has been pre-tuned by the factory to the
following Analogue TV channels.
If your location does not
receive these channels,
perform "Auto tuning" (p. 24).
start
DVD Recorder or VCR
75
Ω
Coaxial cable
VHF / UHF aerial
Rear terminal portion (enlarged view)
Rear of the TV
Mains lead
Fastener
•
To unfasten
■
Watching TV
( Connect after all the
other connections.)
Note
•
Do not put the Coaxial cable close to the mains lead to avoid noise.
•
Do not place the Coaxial cable under the TV.
•
To obtain optimum quality picture and sound, an Aerial, the correct cable (75
Ω
coaxial) and the correct
terminating plug are required.
•
If a communal Aerial system is used, you may require the correct connection cable and plug between the wall
Aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
•
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
1
■
To record TV
programmes
or
Programme No. Channel No.
110
22
328
77
99
31 31
