20
FRONT PANEL OPERATION
The P 7 uses an elegant and simple front panel interface. With only two buttons and one Volume/
Select knob you can control most P 7 features.
A soft blue glow surrounds the On-Off button when the P 7 is turned off. The P badge also
glows faintly red. Push the On-Off button once to turn on the P 7. The blue glow and red P badge
will become brighter. When the P 7 is turned on, the front panel display will also illuminate. Push
the On-Off button again to turn it off.
Using the Multi-Function Volume/Select knob
By using the Select button in conjunction with the Volume/Select knob you can control many of
the features of the P 7 from the front panel. In normal operation the Volume/Select Knob adjusts
the volume level of the P 7. Each press of the Select button changes the function of the knob
from volume adjust to become the selector for the next function. This is the order of the
functions you can adjust:
Adjust Subwoofer Level Trim
Adjust Left/Right Balance
Adjust Front/Rear Balance
If the Volume/Select knob isn’t turned to make an adjustment within 5 seconds after pressing
the Select button it will revert to controlling the volume level.
Rotate the Selector knob right or left to cycle through the source inputs.
Rotate the Selector knob right or left to increase or decrease
Rotate the Selector knob right or left to increase or decrease bass response.
Rotate the Selector knob right or left to increase or decrease treble response.
Rotate the Selector knob left or right to shift the balance to the
Rotate the Selector knob left or right to shift the multichannel sound-
stage balance toward the front or the rear speakers. Front speakers include; Front Left, Front
Right and the Center Channel. Rear speakers include; Left Surround, Right Surround, Left Back
Front/Rear Balance can only be adjusted when either In 9/Multi 1 or In 10/Multi 2 is selected.
Note: Front/Rear Balance can only be adjusted when either In 9/Multi 1 or In 10/Multi 2 is selected.Note:
