Paxton Automotive 1300001 Manual

A SERVICE OF

next previous

P/N: 4809638

©2003 Paxton Automotive

All Rights Reserved, Intl. Copr. Secured

10NOV03 v2.0 99-01 MusGT(4809638 v2.0)

1-1

Section 1

INITIAL PREPARATION AND REMOVAL

1.1 INITIAL PREPARATION AND REMOVAL

A. Remove the plastic clips(4) that hold the

grill cover in place. (See Fig. 1-a.)

Fig. 1-a

CLIPS

B. Remove the hood latch support screw using

a T-30 torx bit. (See Fig. 1-b.)

Fig. 1-b

SCREW

C. Place car on lift or jackstands.

D. Remove the screw at the bottom of the sup-

port bar. (See Fig. 1-c.)

Fig. 1-c

Fig. 1-d

E. Remove the power steering cooler line sup-

port screw. (See Fig. 1-d.)