1 Standby
To set the TV temporarily to standby mode. To switch
on the TV set, press Standby button, Programme button
(CH -, +), any digit between 0 and 9 or AV source
button.
(The amber light indicates when set is in standby mode)
2 Numerical keys
● For direct access to programmes
For a 2-digit programme number, the 2nd digit
must be entered before the dash disappears.
● In PC/Video 'STANDBY' mode, press any of
number keys to return to 'ON' in TV mode.
3 Menu
● To turn on or off the OSD (On-Screen Display)
● To return to last item in OSD and clear menu from
screen
4 Volume
● To adjust the sound level.
● To access the sub-menus and adjust the settings.
5 Previous programme
To access the last programme viewed.
6 SOURCE
● To select PC, TV, AV, S-Video and HD mode.
● In PC 'standby' mode, press SOURCE to switch
to TV mode.
7 Mute
● To disable sound.
● To restore sound, press button again.
8 Audio Mode
● To switch from STEREO to MONO or to choose
between Dual I and Dual II for bilingual
transmissions.
● For TV sets fitted with NICAM reception,
depending on the transmission, you can switch
from NICAM STEREO to MONO or choose
between NICAM DUAL I, NICAM DUAL II and
MONO.
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_control.htm (5 of 6) [3/2/2004 3:44:00 PM]
