15
E
N
How to Use the On Screen Display (OSD)
User Presets
User Presets
If you need to adjust any of the two preset options (DTP or CAD/CAM), follow the steps below to modify the colors that
appear on your screen. You can make individual adjustments to each of the preset options.
Smart Help
After returning to Exit . . .
. . . to continue to User Preset 2,
repeat steps 3 through 7, selecting USER PRESET 2.
. . . to continue to Special Controls window,
turn the ROTARY knob until SPECIAL CONTROL WINDOW is highlighted. Next, press the ON SCREEN
DISPLAY button. Now, follow steps 2 - 5 under SPECIAL CONTROLS on the next page.
. . .to exit the On Screen Display completely,
press the OSD button and choose either SAVE or NO SAVE in setting mode, then push OSD
button to exit OSD. (See page 18 for other exit options.)
Press the OSD button.
3
To exit USER PRESET 1 , press the OSD button. Next,
turn the R
OTARY knob until the EXIT box is highlighted.
Then, press the O
N SCREEN DISPLAY button.
1
2
2
Turn the ROTARY knob until the COLOR
window is highlighted. Next, press the
OSD button. Then, turn the R
OTARY knob
until U
SER PRESETS icon is highlighted.
Color Temperature window
4
If necessary,
turn the R
OTARY
knob until
of the U
SER
PRESETS is
highlighted.
Next, press the
O
N SCREEN
DISPLAY button.
First, RED will be highlighted.
Next, to adjust the red,
press the OSD button again.
Then, turn the R
OTARY knob to
increase or decrease the red.
5
When done with red, press the
OSD button. G
REEN will be
highlighted. Then, turn the
R
OTARY knob to increase or
decrease the green.
When done with green, press
the OSD button. B
LUE will be
highlighted. Then, turn the
R
OTARY knob to increase or
decrease the blue.
7
