Philips 2.73E+05 Manual

A SERVICE OF

next previous

49

Q8: Can I change the color setting of my

monitor?

Ans.:Yes,youcanchangeyourcolorsetting

through OSD control as the following

procedures,

• Press "OK" to show the OSD (On Screen

Display) menu

• Press"DownArrow"toselecttheoption

"Color" then press "OK" to enter color

setting, there are three settings as below.

1. Color Temperature; The six settings

are 5000K, 6500K, 7500K, 8200K, 9300K

and 11500K. With settings in the 5000K

    rangethepanelappears‘warm,'witha

red-white color tone, while a 11500K

    temperatureyields‘cool,blue-white

toning."

2. sRGB; this is a standard setting for

ensuring correct exchange of colors

between different device (e.g. digital

cameras, monitors, printers, scanners,

etc)

3. User Define; the user can choose

his/her preference color setting by

adjusting red, green blue color.

Note:

 Ameasurementofthecoloroflight

radiated by an object while it is being heated.

This measurement is expressed in terms of

absolute scale, (degrees Kelvin). Lower Kevin

temperatures such as 2004K are red; higher

temperatures such as 9300K are blue.

Neutral temperature is white, at 6504K.

Q9: Can I connect my LCD monitor to any PC,

workstation or Mac?

Ans.:Yes.AllPhilipsLCDmonitorsarefully

  compatiblewithstandardPCs,Macsand

  workstations.Youmayneedacableadapter

  toconnectthemonitortoyourMac

system. Please contact your Philips sales

representative for more information.

Q10: Are Philips LCD monitors

Plug-and- Play?

Ans.:Yes,themonitorsarePlug-and-Play

compatible with Windows 7/Vista/XP/NT,

  MacOSX,Linux

Q11: What is Image Sticking, or Image

Burn-in, or After Image, or Ghost Image in

LCD panels?

Ans.: Uninterrupted display of still or static images

over an extended period may cause

"burn in", also known as "after-imaging" or

"ghost imaging", on your screen. "Burn-in",

"after-imaging", or "ghost imaging" is a

well-known phenomenon in LCD panel

technology. In most cases, the "burned in" or

"atter-imaging" or "ghost imaging" will

disappear gradually over a period of time

after the power has been switched off.

  Alwaysactivateamovingscreensaver

program when you leave your monitor

unattended.

  Alwaysactivateaperiodicscreenrefresh

application if your LCD monitor will display

unchanging static content.

Warning

Severe"burn-in" or "after-image" or

"ghost image" symptoms will not disappear

and cannot be repaired. The damage

mentioned above is not covered under your

warranty.

Q12: Why is my Display not showing sharp text,

and is displaying jagged characters?

Ans.:YourLCDmonitorworksbestatitsnative

  resolutionof1920x1080@60Hz.Forbest

display please use this resolution.

7. Troubleshooting & FAQs