10
2. Setting up the monitor
How to enable MultiView by hotkey?
1. Press the hotkey
directly on the
front bezel.
2. The MultiView selection menu appears.
PbP
Swap
Off
PiP
Multi View
P
3. Press
and then exit automatically.
How to enable MultiView by OSD menu?
Besides pressing the hotkey directly on
the front bezel
, the MultiView function can also
be selected in OSD menu.
1. Press button on the front bezel to
enter OSD Menu Screen.
PiP/PbP
di
i
r
n
u
olo
PiP/PbP Mode
PiP/PbP Input
PiP Size
Swap
PiP Position
Off
PiP
PbP
[PiP / PbP], then press
button.
PiP / PbP
Mode], then press
button.
PiP] or
[PbP].
Now you can move backward to set the
[PiP / PbP Input], [PiP Size], [PiP Position].,
or [Swap].
2. Press
MultiView in OSD menu
PiP / PbP Mode: There are two modes for
MultiView: [PiP] and [PbP].
[PiP]: Picture in Picture
Open up a sub-window of
another signal source.
B
A
(main)
When the sub source is not
detected:
B
A
(main)
[PbP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
A (main)B
When the sub source is not
detected:
A (main)
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PbP mode.
