ENGLISH 23ENGLISH22
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Unplug the charging stand. The charging stand
may be wiped clean using a damp cloth.
C 1 The faucet symbol will start blinking after
each shave to remind you that the razor
needs to be cleaned.
Cleaning: Razor Heads
The easiest and most hygienic way to clean the
razor heads is to rinse them after each use or
at least once a week with hot water: Water
from the tap should be on a hot setting, BUT
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
1 Always turn razor OFF, unplug from outlet
and remove cord from razor or charging
stand before cleaning.
C 2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C 3 Clean inside razor heads and hair chamber
by running under hot water.
Trimming
To groom sideburns and moustache:
1 Turn razor ON.
C 2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C 3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C 4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.
Cleaning
C ◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF,unplug and remove
power cord before cleaning.
◗ Never clean,remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
