8 EN
3 Connect
Place the unit
1 Place the unit near to the TV.
2 Placetheleftandrightspeakersatequal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•
To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
• Place this unit on top of a table or mount it on the wall.
• Never place this unit in an enclosed cabinet.
• Install this unit near the AC outlet where the AC power
plug can be easily reached.
Connect speakers
Note
•
For optimal sound, use the supplied speakers only.
• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specicationssectionofthismanual.
[Fig. 4]
Connect video cables
You can select the best video connection that
your TV supports.
• Option 1: Connect through a composite
video (CVBS) cable (for a standard TV).
• Option 2: Connect through component
video cables (for a standard TV or
Progressive Scan TV).
Option 1: Connect through a
composite video cable
Connect the composite video cable (supplied)
to: [Fig. 5]
• the VIDEO socket on the back of the
unit.
• the video input socket on the TV.
SPEAKER OUT
TV
