![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/6b/26b2042d-8ec0-4cfa-bb8c-52a3ffe1955a/26b2042d-8ec0-4cfa-bb8c-52a3ffe1955a-bg8.png)
8 Philips PPF 620
EN
3 Initial Operation
Package Contents
Basic Package Contents
‚ Device
ƒ Paper tray
„ Power cord with plug (country-specific)
… Telephone cord with plug (country-specific)
User Manual
User manual with installation guide (not depicted)
Package Contents
Packing Contents
Attaching the Paper Tray
Attaching the Paper Tray
Insert the paper tray into the openings behind the paper
feed mechanism.
Attaching the Paper Tray
Inserting Paper
Paper Format
Before you can receive documents or make copies, you
must load paper into the device. Please use only appropri-
ate paper in standard format A4 (210 × 297 millimetre ·
preferably 80 g/m
2
). Follow the specifications in the tech-
nical data.
Loading P aper
Preparing Paper
Inserting Paper
1 Fold open the lever on the right beside the paper feed
towards front.
2 Insert paper in the paper feeder. You can insert maxi-
mum 50 sheets (A4 · 80 g/m2).
3 Fold open the lever on the right beside the paper feed
backward in order to enclose the paper.
Inserting Paper
Connecting the Telephone Cable
Connecting the Te lephone Cable
Connecting the Te lephone Cable
Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your PTT line socket.
Connecting the Te lephone Cable
PABX Systems 1
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.
Separate the paper sheets by fanning them out, then
align them by tapping edge of the stack lightly
against a flat surface. This will prevent several sheets
of paper from being drawn in all at once.
Your device is an analogue fax device (Group 3). It is
not an ISDN device (Group 4), and therefore it can-
not be operated directly on an ISDN connection. In
order to do this, you need either an analogue adapter
or a connection for analogue terminals.
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 20).