1. Lever the battery cover open by using the
clip on the strap. Picture D1.
2. Remove the old battery from the battery
cover with a suitable sized small rigid stick
or bar, such as a toothpick. A non-metal
tool is preferable. Be careful not to damage
the battery cover. Picture D2.
3. Insert a new battery (CR 2025) inside the
cover with the negative (-) side facing up.
Picture D3.
4. Align the ledge on the battery cover with
the slot on the connector and press the
battery cover back into place. You should
hear a snap. Picture D4.
When changing the battery, make sure the
sealing ring is not damaged, in which case you
should replace it with a new one to ensure the
water resistance of the connector. For video
tutorials on how to change the batteries, go to
www.polar.com/en/polar_community/videos.
You can purchase the sealing ring/battery kits at
well-equipped Polar retailers and authorized
Polar Services. In the USA and Canada, the
additional sealing rings are available at
authorized Polar Service Centers. In the USA
the sealing ring/battery kits are also available at
www.shoppolar.com. Go to www.polar.com to
find your own country's shoppolar online store.
6 ENGLISH
