40
THE PERFECT FIT
Suspension Quick Set-Up Guide
The suspension on your RUSH is incredibly easy to adjust to your
weight and riding style. Just remember three simple steps:
1. Set up rear shock spring preload for rider weight.
2. Adjust the rear spring to tune vehicle balance (ski pressure and
weight transfer).
3. Adjust shock clickers to tune ride quality (stiffer or softer ride).
The following Quick Set-Up Guide walks you through what you need to
know to get started, and additional detail is available on the pages
immediately following the guide. See pages 42-43 for factory and initial
suspension charts for the standard spring as well as for accessory
springs that are available for heavier or lighter riders.
Step 1: Set up rear shock spring preload for rider weight.
Before riding for the first time, use the gauge supplied with your snow-
mobile to adjust rear spring preload to the appropriate setting for the
rider’s weight.
Position the narrow end
of the gauge flush with
the spring retainer. Turn
the spring until the
rider’s weight setting
aligns with the junction
of the shock body and
end cap.
Make no other suspen-
sion adjustments at this
time. Test ride the snow-
mobile in various terrain
to fully experience the
existing suspension set-
tings before making
adjustments.
Spring Retainer/Adjustment Nut
Shock Body/End Cap
Junction
