57
If you live near a television station’s transmit-
ter tower, you may receive an interfering sig-
nal from the station while watching other TV
channels. Your television’s Antenna
Attenuator control is designed to reduce the
strength of such a signal in the presence of a
strong main signal. The default setting for the
Antenna Attenuator is “Off.” If you need to
use the feature, simply toggle it “On” in the
on-screen menu.
1
Press the Menu button on the remote
control to display the on-screen menu.
2
Press the Cursor Right button repeat-
edly to select “Channels.”
3
Press the Cursor Down button repeat-
edly to select the “Antenna attenuator”
control.
4
Press the Cursor Right button to toggle
the control “On” or “Off.”
5
Press the Menu button to remove the
on-screen menu from the TV screen.
Turning the Antenna Attenuator on or off
