A SERVICE OF

logo

Open as PDF
next previous
Feature Reference
5-264
■ All of the system and telephone programming settings that were in effect
before the power failure or down period are retained (except those
mentioned in the “Related Features” section above); they do not revert to
the default settings.
Using
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To reset the system, press
f 0 0 s s # 7 2 8
at extension 10 or 11.
A display similar to the following appears:
Reset - Save All
When the reset is completed, the system is no longer in Programming Mode and
the date and time appear on the display.