Configuring the SpectraLink 8000 SVP Server
To change the IP address of the master SVP Server, change it in
this menu and reboot the system. Then you may change alias IP
addresses in each of the other SVP Servers without error.
The following options must be configured:
I
Enter the IP address of the SVP Server, defined by your network
ter the complete address including digits and
periods.
DHCP may be entered.
P Address
administrator. En
A master SVP Server must have a static IP address.
ntenance if the IP
address is changed. When this
Maintenance Lock occurs, the SVP Server
s are terminated during a reset.
default host name, if desired. This is the name
which you are connected, for identification
annot enter spaces in this field.
The SVP Server will automatically lock for mai
must be reset upon exit. All active call
Hostname
(Optional) change the
of the SVP Server to
purposes only. You c
The host names for each SVP Server and OAI Gateway on the
system must be unique.
The IP address of a router on the local subnet.
ad Master
.
• NONE: disables.
Subnet Mask
The network administrator must define the subnet mask.
Default Gateway
SVP-II TFTP Downlo
This entry indicates the source of software updates for the SVP Server
See Chapter 5 Software Maintenance for more information. Valid source
location entries are:
PN: 1725-36031-001_G.doc
2
