A SERVICE OF

logo

Voltage Check of Pump Relay
1) At the controller, turn on the station or master valve (MV)
that controls the pump relay to be tested.
2) At the pump relay, expose a part of each of the two wires
coming out of the relay.
3) Touch a probe to each of the exposed wires.
4) Check the reading on your multimeter.
Acceptable range: 24-28 V (AC)
Rain Bird Corporation
970 West Sierra Madre Avenue
Azusa, CA 91702
www.rainbird.com
-
12
-
SET METER TO
600
PROBE
CONNECTIONS
BLACK
COM
RED
V
ñ
V
AC
RB.DSA500.TGuide.mech2 3/20/03 12:39 PM Page 12