Retrieving Codes
1. Press and hold CODE SEARCH
until the INDICATOR LIGHT
lights, then release CODE
SEARCH.
2. Press and release the device
button for the device’s code
you are retrieving (
TV, VCR, or
CABLE). The INDICATOR
LIGHT
will blink once then
remain lit.
3. Press and release
CODE
SEARCH
. The INDICATOR
LIGHT
will turn off.
4. Starting with
0 on the keypad,
press the number buttons in
order (
0-9) until the
INDICATOR LIGHT blinks.
5. The number which causes the
INDICATOR LIGHT to blink is
the first digit of your code.
6. Repeat step 4 until you have
retrieved all three numbers in
the code.
If you need to find the three-digit code for your TV, VCR or
Cable Box after your device is set-up using Code Search, use
this procedure.
(BLINK)
INDICATOR
LIGHT
(OFF)
(BLINK)
Cable Box Code List
ABC ..........................001, 003, 004
..................................005, 006, 007
Antronix ............................008, 009
Archer................008, 009, 010, 011
Cabletenna................................008
Cableview..................................008
Century......................................011
Citizen........................................011
Colour Voice......................012, 013
Comtronics ................................015
Contec ......................................016
Eastern......................................017
Garrard ......................................011
GC Electronics ..........................009
Gemini ..............................018, 019
General Instru ..........049, 001, 003
Hamlin ......................................035
Hitachi ......................................003
Jasco ........................................011
Jerrold ..............049, 001, 003, 005
..................007, 018, 023, 024, 046
Magnavox..................................025
Movie Time........................027, 028
NSC ..................................027, 028
OAK ..................................029, 016
Panasonic..........................000, 048
Philips ...............011, 012, 013, 019
..........................025, 030, 031, 032
Pioneer..............................034, 033
RCA...........................000, 047, 049
Realistic.....................................009
Regal.................................022, 035
Regency.....................................017
Rembrandt ................................003
Samsung ...................................034
Scientific Atlanta................006, 036
..........................................037, 038
Signal ........................................018
Signature ..................................003
Sprucer......................................000
Standard Component ................039
Starcom ....................001, 007, 018
Stargate ....................................018
Starquest ..................................018
Tocom................................004, 023
Tusa ..........................................018
TV86..........................................027
Unika ........................008, 009, 011
United Cable..............................001
Universal ..........008, 009, 010, 011
View Star ..........015, 016, 025, 027
Zenith ................................050, 051
Programming With Code Search
1. Turn on the device you wish
to program.
2. Press and hold CODE SEARCH
until the INDICATOR LIGHT
lights, then release CODE
SEARCH.
3. Press and release the device
button for the device you are
programming (TV, VCR or
CABLE). The INDICATOR
LIGHT will blink once then
remain lit.
4. Press and release
OFF•ON until
your device turns off.
Important: You may have to press
OFF•ON up to 200 times.
5. When your device turns off,
press the
ENTER button, the
INDICATOR LIGHT will go off.
If your TV, VCR, or Cable Box does not respond after you have
tried all the codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
(BLINK)
INDICATOR
LIGHT
(OFF)
10
....
9
