A SERVICE OF

logo

Open as PDF
next previous
Regency
®
P33-4 Zero Clearance Direct Vent Gas Fireplace
22
FlexLiner
Exhaust
Flue
A maximum
oftwocertified
joinerkits
maybeused
perlength.
#948-305
35ft(11m)
AirIntake
Co-linearDV
Vertical Termination
Cap#946-529
Co-Linear
Flex
Adapter
withKit#
946-563
Outer
Pipe
withKit#
946-563
InnerPipe
Adapter
withKit#
946-563
RigidPipe Adapter
#510-994
PipeLength
45 Elbow
o
VERTICAL TERMINATION
WITH CO-LINEAR FLEX SYSTEM
This appliance is designed to be attached to
two 3" (76mm) co-linear aluminium fl ex running
the full length of the chimney. See the "Venting
Arrangements - Vertical Terminations" Section
for minimum and maximum heights.
Required Parts:
Part # Description
946-529 Co-linear DV Vertical
Termination Cap
948-305 3" Flex - 35 ft.
946-563 Co-Axial to Co-Linear Adapter Kit
which contains the following:
Co-linear Flex Adapter
Outer Pipe
Inner Pipe Adapter
510-994 Rigid Pipe Adaptor
945 45
o
Elbow
Alternate Approved Caps
980 Vertical Termination Cap
991 High Wind Cap
923GK
3" Co-linear Adapter with fl ashing
Masonry chimneys may take various contours which the fl exible liner will accommodate. However,
keep the fl exible liner as straight as possible, avoid unnecessary bending.
The Air Intake pipe must be attached to the inlet air collar of the termination cap.
INSTALLATION
THE APPLIANCE MUST NOT BE
CONNECTED TO A CHIMNEY FLUE
SERVING A SEPARATE SOLID FUEL
BURNING APPLIANCE.
FPI Cabinet and/or Flat Wall Mantles may
be used in these applications ensuring
that clearances to combustibles are
maintained.