Chapter 2
2 - 6
Setting the Beeper Volume
You can change the beeper volume. The
default setting is Med. When the beeper is on,
the machine will beep when you press a key,
make a mistake, or after you sent or received
a fax.
1 Press Menu/Set, 1, 4, 2.
2 Press ▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3 Press Stop/Exit.
Setting the Speaker Volume
You can adjust the machine’s one-way
speaker volume.
1 Press Menu/Set, 1, 4, 3.
2 Press ▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3 Press Stop/Exit.
—OR—
(Only for North America Model)
In Fax mode , you can adjust the
speaker volume by pressing Hook/Hold, and
then selecting a speaker volume level.
Press or to adjust the volume
level. The LCD shows the setting you are
choosing. Each key press changes the
volume to the next level. The new setting will
remain until you change it again.
Setting the Handset Volume
(For USA and Canada only)
1 Press Menu/Set, 1, 4, 4.
2 Press ▲ or ▼ to select High or Low.
Press Menu/Set.
3 Press Stop/Exit.
—OR—
You can adjust the handset volume any time
you are talking on the telephone. There are
two handset volume levels, Low and High.
The default setting is Low.
Press or to adjust the volume
level. The LCD shows the setting are
choosing. The new setting will remain until
you change it again.
2.Beeper
3.Speaker
▲
▲
4.Handset
▲
▲
