Roberts Radio CRD-36 Manual

A SERVICE OF

next previous

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

12

Dynamic Range Control (DRC) settings - DAB only

DRCcanmakequietersoundseasiertohearwhenyourradioisusedin

a noisy environment. This function is only for the DAB waveband.

1. Press the

Standby button [On/off on remote control] to switch on

your radio.

2. Press and release the

Menu button until"Stationorder"appearson

the display.

3. Press and release the

Skip Up and Down buttons until the display

shows"DRCvalue".

4. Press and release the

Select button to enter adjustment mode.

5. Press and release the

Skip Up or Down buttonstoselectrequired

DRC setting (default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

6. Press and release the

Select buttontoconrmthesetting.Thedisplay

will return to radio mode.

1

2

3,5

3,5

4,6