Troubleshooting
(continued)
115
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
SD Memory Card-Related Problems
Problem
Cause and Action
See
Page
The SD memory card is
not detected
●
Could the SD memory card be of a capacity that is not supported?
➔
Check the capacity of the SD memory card, and use a card of a capacity
supported by the CD-2e.
122
●
Is the SD memory card inserted all the way into the slot?
➔
Make sure that the card is oriented correctly, and that it’s pushed all the
way into the slot.
24
●
Could you have turned off the power while recording, or could the SD
memory card have been subjected to a strong impact?
➔
It’s possible that the data has been damaged. Reformat the SD memory
card.
104
Normal playback does
not work
●
Is the audio source set to “SD”?
➔
Press the [SD CARD] button to choose “SD” as the audio source.
60
●
Could you have inserted an SD memory card on which nothing has
been recorded?
➔
Insert a different SD memory card.
—
●
Could you be using repeat playback?
➔
Turn the repeat setting “Off” so that the or symbol isn’t shown.
65
●
Could you be using A-B Repeat playback?
➔
Press the [REPEAT] button to get the A-B Repeat icon ( ) to disappear.
➔
Alternatively, press the [ (Stop)] button to stop playback. A-B Repeat
playback will be defeated.
66
●
Could the playback speed have been changed?
➔
Set the Speed setting to “0” so that the Speed icon ( ) disappears.
67
●
Could the Pitch setting have been changed?
➔
Set the Pitch setting to “0” so that the Pitch icon ( ) disappears.
63
●
Could the Key setting have been changed?
➔
Set the Key setting to “0” so that the Key icon ( ) disappears.
62
●
Could Center Cancel be turned “On”?
➔
Set the Center Cancel to “Off” so that the Center Cancel icon ( )
disappears.
64
●
Could the [ (Play)] button be blinking?
➔
If the button is blinking, the CD is paused. Press the [ (Play)] button
to defeat pause.
60
CD-2e_e.book 115 ページ ２００７年９月１０日 月曜日 午後８時５７分
