AdjustingthePictureQuality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen.
POWER
,/H',_ oo
<-I2\2; k3;
PRE-CH
ANTENNA CHMGR FAVCH WISELINK
<}
CAPTION INFO SLEEP
\/
I'_ODE smor}E srl] PSlZ[
0000
©SEI ©REST
S_MSUNG
NOTE
• This feature may change
the width of the image.
If necessary, adjust the
position to center.
Pressthe SOURCE button to select "PC".
Pressthe MENU button.
Pressthe • or • button to
select "Setup", then press
the ENTER button.
Pressthe • or • button to
select "PC", then press the
ENTER button.
,,j Pressthe ENTER button to
select "Image Lock", then
press the ENTER button.
Pressthe • or • button to
select "Coarse" or "Fine",
then press the ENTER button.
• You can also select
these options (Coarse,
or Fine) by pressing the
• or • button.
,<} Press the _1or • button to
remove the picture noise.
Pressthe EXITbutton to exit.
English- 109
