Transfer/Conference Tone—Indicates your call is being held and you can dial another party.
Confirmation Tone—Very short beeps followed by dial tone indicate you have correctly set or canceled a
system feature.
ERROR TONE—A distinctive two level beeping tone indicates you have done something incorrectly. Try
again.
TRANSFER/CONF TONE—100 ms ON/100 ms OFF
CONFIRMATION TONE—50 ms ON/50 ms OFF
ERROR TONE—50 ms of tone 1/50 ms of tone 2
CONTINUOUS
FOR TWO SECONDS
FOR TWO SECONDS
3.6 KEYSET LED INDICATIONS
CONDITION LED COLOR LED ON LED OFF
LINE IDLE OFF – OFF
LINE IN USE RED/GREEN STEADY –
RECALL AMBER 500 ms 500 ms
CALL ON HOLD RED/GREEN 500 ms 500 ms
RINGING C.O. CALL GREEN 100 ms 100 ms
RINGING INTERNAL CALL GREEN 100 ms 100 ms
DND INDICATION RED 112 IPM for 500 ms 500 ms
OPERATOR CALLS RED 100 ms 100 ms
ANS/RLS (DND)*
(
**
)
RED 112 IPM for 500 ms 500 ms
ANS/RLS (HDSET MODE)** RED STEADY –
TRSF (FORWARD ALL)** RED STEADY –
*Overrides headset mode
**DCS model keysets only
3.4
