19
Installing the battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter. The phone can be used while the
battery is charging, but must be fully charged the first time you use your
phone otherwise the battery could be damaged.
To attach the battery to your phone:
1. Place the battery on to the back of the phone, making sure that the three
plastic tabs line up with the corresponding slots on the phone.
2. Gently push the top end of the battery down and upward on the phone
until it snaps into place.
Removing the battery
To remove the battery from your phone:
1. Make sure the power is off by pressing and holding so you don’t
lose any stored numbers or messages.
2. Push down the battery release latch and slide the battery downwards.
3. Lift the battery away from the phone.
